[ UA-G2-Pro-Black ] รีวิว จำหน่าย ราคา Unifi Access UA-G2-Pro-Black NFC Reader Pro มีกล้องวิดีโอสำหรับผู้มาเยือน, อินเตอร์คอม, ปลดล็อคด้วย NFC/App,PoE
หมวดหมู่ : UniFi ,  Unifi Access ,  Door Access , 
Share
Unifi Access UA-G2-Pro-Black เป็นอุปกรณ์อ่านบัตร NFC รุ่นที่สอง พร้อมฟังก์ชั่นอินเตอร์คอม ปลดล็อคได้ทั้งด้วยบัตร NFC หรือแอป UniFi Identity มีระบบประตูที่แสดงวิดีโอผู้มาเยือนพร้อมการสื่อสารสองทาง รองรับการปลดล็อคด้วยรหัส PIN บนหน้าจอและเชื่อมต่อกับ UniFi Access Hub ผ่าน PoE ทนต่อฝนได้ดีตามมาตรฐาน IP55 (อุณหภูมิ -10 ถึง 45° C)
คุณสมบัติเด่น
UniFi OS ถูกออกแบบมาเพื่อการใช้งานที่หลากหลาย โดยคุณสามารถบริหารจัดการอุปกรณ์ต่างๆ ได้จากหน้าจอ Unifi Controller เพียงหน้าจอเดียว นอกจากนี้แล้ว Unifi ยังมี Mobile App ให้คุณได้ใช้งานกันฟรีๆอีกด้วย
Network Application
Protect Application
Access Application ระบบควบคุมการเข้าออกประตู
Talk Application ระบบโทรศัพย์ผ่าน Internet
UA-G2-Pro-Black | |
Dimensions | 160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6") |
Weight | 136 g (4.8 oz) |
Enclosure material | Polycarbonate, glass |
Mount material | Aluminum alloy |
Mounting | Wall, gang box |
Weatherproofing | IP55 |
Hardware | |
Networking interface | (1) GbE RJ45 port |
Connectivity | BLE 4.2 NFC |
Power method | PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU |
Supported voltage range | 48V DC |
Max. power consumption | 6W |
ESD/EMP protection | Air: ±15kV, contact: ±8kV |
Sensor | Proximity sensor |
Camera | 4000 x 3000, 12 MP, 30 FPS |
Microphone | Yes |
Speaker | (1) 4 ohm, 1.5W |
LEDs | R/G/B/W Flash |
Button | (1) Factory-reset |
NFC frequency | 13.56 MHz |
NFC read range | < 30 mm |
NFC standards | ISO 14443A, 14443B, 15693 |
NFC technology | NFC Tag 1,2,3,4,5 MIFARE Classic MIFAREPlus MIFARE Ultralight MIFARE DESFire |
Operating environment | Outdoor use |
Operating temperature | -10 to 45° C (14 to 113° F) |
Operating humidity | 5 to 90% noncondensing |
UL 294 level | Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I |
UL 294 statement | Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
PoE cabling requirements | Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm2) for patch cords; 24 AWG (0.21 mm2) for horizontal or riser cable. |
CAN/ULC-60839-11-1 Grade | Grade assignment: I |
Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
Document number, and issue date and/or revision level | UA-G2-Pro/UA-G2-Pro-Black, V02 |
LED | |
System | Steady blue: Adopted/device is ready Steady white: Pending adoption Blinking white/blue: Upgrading firmware Strobing red: Emergency lockdown |
Software | |
Management application | UniFi Access: Version 1.5.9 and later |
Downloads
Datasheet
Installation Guide